Offshore steel structures and ship coating (heavy-duty)
Model

Penguard FSG II epoxy

A epoxy intermediate coat / topcoat in the Jotun range, Penguard FSG II (5CZ) is selected for steel structures exposed to atmospheric exposure. This model offers fast-drying / high solids / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard FSG II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard FSG II — product overview

Penguard FSG II belongs to the epoxy system and is a two-component product used as intermediate coat / topcoat; service environment atmospheric exposure; application and system notes are set out below.

Penguard FSG II — positioning

Penguard FSG II is a epoxy intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.

The substrate for this product is carbon steel / galvanised steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where fast-drying / high solids / high-build are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Penguard FSG II — key data

ModelPenguard FSG II
Manufacturer product name5CZ
Resin systemepoxy
Componentstwo-component
Typical number of coatsintermediate coat / topcoat
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Key characteristicsfast-drying / high solids / high-build
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids66 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point27 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-fsg-ii.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard FSG II — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard FSG II and the intended use.

Penguard FSG II — common questions

Which substrates can Penguard FSG II be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Penguard FSG II?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Penguard FSG II have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Penguard FSG II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard FSG II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat