Offshore steel structures and ship coating (heavy-duty)
Model

Penguard FC epoxy

A epoxy primer / topcoat in the Jotun range, Penguard FC (0UW) is selected for steel structures exposed to atmospheric exposure / immersion service. For the complete technical data, request the manufacturer's TDS and SDS for Penguard FC.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard FC — product overview

A two-component epoxy coating, normally used as primer / topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure / immersion service; suitable on steel.

Penguard FC — positioning

Penguard FC is a epoxy primer / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure / immersion service.

Penguard FC — key data

ModelPenguard FC
Manufacturer product name0UW
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure / immersion service
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids62 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point28 °C
GlossSemi-gloss
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-fc.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard FC — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard FC and the intended use.

Penguard FC — common questions

What are the minimum order quantity and lead time for Penguard FC?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Penguard FC?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Penguard FC controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Penguard FC

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard FC

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat