Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Express WF epoxy

Penguard Express WF belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure service. This model offers fast-drying / high solids / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Express WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Express WF — product overview

two-component epoxy product for use as primer / intermediate coat / topcoat; fast-drying / high solids / high-build; substrates carbon steel / galvanised steel; service environment atmospheric exposure.

Penguard Express WF — positioning

Penguard Express WF (6DV) — in the Jotun range — is a epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure conditions apply.

Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

It suits projects where fast-drying / high solids / high-build matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Penguard Express WF — key data

ModelPenguard Express WF
Manufacturer product name6DV
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel
Key characteristicsfast-drying / high solids / high-build
Colour rangeGrey / White
Application methodairless spray / brush
Surface preparation gradesa 2½ / st 2
Volume solids63 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point100 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-express-wf.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry4 h2 h1 h
Walk-on dry15 h7 h4 h
Recoat, minimum15 h7 h4 h
Dried/cured for service12 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-express-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standards and approvals for Penguard Express WF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Express WF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Penguard Express WF, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Penguard Express WF — common questions

What are the key characteristics of Penguard Express WF?

This model offers fast-drying / high solids / high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Penguard Express WF controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Penguard Express WF be used on?

The TDS lists the substrate as carbon steel / galvanised steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Penguard Express WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Express WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat