Offshore steel structures and ship coating (heavy-duty)
Model

Penguard E55 epoxy

A epoxy primer / intermediate coat / topcoat in the Jotun range, Penguard E55 (0Z3) is selected for steel structures exposed to atmospheric exposure. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Penguard E55.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard E55 — product overview

This is a two-component epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by fast-drying; service environment atmospheric exposure; suitable for protective coating of carbon steel / aluminium.

Penguard E55 — positioning

Penguard E55 (0Z3) — in the Jotun range — is a epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure conditions apply.

Three things decide the system: the substrate (carbon steel / aluminium), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Where fast-drying are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Penguard E55 — key data

ModelPenguard E55
Manufacturer product name0Z3
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure
Suitable substratescarbon steel / aluminium
Key characteristicsfast-drying
Colour rangeLight yellow / Grey / White
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids55 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point30 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-e55.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / aluminium / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard E55 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Penguard E55, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard E55 — common questions

Which coat does Penguard E55 take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Penguard E55?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Penguard E55?

This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Penguard E55

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard E55

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat