Offshore steel structures and ship coating (heavy-duty)
Model

Muki Z 2008 temporary protective material

Muki Z 2008 is a temporary protective material rust prevention (temporary protection) from the Jotun range, formulated for steel structures in atmospheric exposure. This model offers fast-drying / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Muki Z 2008.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Muki Z 2008 — product overview

Muki Z 2008 belongs to the temporary protective material system and is a one-component product used as rust prevention (temporary protection); service environment atmospheric exposure; application and system notes are set out below.

Muki Z 2008 — positioning

Jotun's Muki Z 2008 is a temporary protective material rust prevention (temporary protection) for atmospheric exposure conditions, supplied with its technical documentation.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

The model is notable for fast-drying / abrasion-resistant.

It is used for protective coating work in atmospheric exposure conditions.

Muki Z 2008 — key data

ModelMuki Z 2008
Manufacturer product name0HT
Resin systemtemporary protective material
Componentsone-component
Typical number of coatsrust prevention (temporary protection)
Service environmentatmospheric exposure
Suitable substratescarbon steel
Key characteristicsfast-drying / abrasion-resistant
Colour rangeTo the manufacturer colour card
Application methodspray or brush
Surface preparation gradesa 2½
Volume solids28 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point14 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-muki-z-2008.pdf)

Application and system notes

Application: spray or brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature23 °C40 °C
Touch dry1 min1 min
Walk-on dry3 min1 min
Recoat, minimum1 d1 d

Data taken from the manufacturer's TDS jotun-muki-z-2008.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as rust prevention (temporary protection); the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Muki Z 2008 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Muki Z 2008 and the intended use.

Muki Z 2008 — common questions

What are the key characteristics of Muki Z 2008?

This model offers fast-drying / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Muki Z 2008 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Muki Z 2008 be used on?

The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Muki Z 2008

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Muki Z 2008

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat