Offshore steel structures and ship coating (heavy-duty)
Model

Marathon 550 epoxy

Marathon 550 is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. This model offers abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Marathon 550.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Marathon 550 — product overview

two-component epoxy product for use as primer / intermediate coat / topcoat; abrasion-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.

Marathon 550 — positioning

A epoxy primer / intermediate coat / topcoat in the Jotun range, Marathon 550 (02A) is selected for steel structures exposed to atmospheric exposure / immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where abrasion-resistant matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Marathon 550 — key data

ModelMarathon 550
Manufacturer product name02A
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicsabrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids85 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point42 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-marathon-550.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C15 °C23 °C40 °C
Touch dry15 h11 h9 h4 h1.5 h
Walk-on dry26 h18 h14 h8 h3 h
Recoat, minimum26 h18 h14 h8 h3 h
Dried/cured for service14 d10 d10 d7 d3 d

Data taken from the manufacturer's TDS jotun-marathon-550.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Marathon 550 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Marathon 550 and the intended use.

Marathon 550 — common questions

What are the key characteristics of Marathon 550?

This model offers abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Marathon 550 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Marathon 550 be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Marathon 550

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Marathon 550

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat