Marathon 500 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Marathon 500 — product overview
Marathon 500 belongs to the epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.
Marathon 500 — positioning
Marathon 500 (0H7) is the epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where high solids / high-build / surface-tolerant / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.
Marathon 500 — key data
| Model | Marathon 500 |
|---|---|
| Manufacturer product name | 0H7 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | high solids / high-build / surface-tolerant / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 85 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 43 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-marathon-500.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 14 h | 10 h | 4 h | 1.5 h |
| Walk-on dry | 24 h | 18 h | 8 h | 3 h |
| Recoat, minimum | 24 h | 18 h | 8 h | 3 h |
Data taken from the manufacturer's TDS jotun-marathon-500.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
Standards and approvals for Marathon 500 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Marathon 500 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Marathon 500 and the intended use.
Marathon 500 — common questions
How many components does Marathon 500 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Marathon 500?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Marathon 500 take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Marathon 500
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
- Jotaprime 500
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Marathon 500
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net