Marathon 1000 GF epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Marathon 1000 GF — product overview
two-component epoxy product for use as primer / intermediate coat / topcoat; high-build / abrasion-resistant; substrates carbon steel; service environment atmospheric exposure / immersion service.
Marathon 1000 GF — positioning
Marathon 1000 GF belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for high-build / abrasion-resistant.
Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.
Marathon 1000 GF — key data
| Model | Marathon 1000 GF |
|---|---|
| Manufacturer product name | 0Z8 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel |
| Key characteristics | high-build / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 98 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 100 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-marathon-1000-gf.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 21 h | 14 h | 10 h | 7 h | 3 h |
| Walk-on dry | 32 h | 19 h | 16 h | 9 h | 4 h |
| Recoat, minimum | 32 h | 19 h | 16 h | 9 h | 4 h |
Data taken from the manufacturer's TDS jotun-marathon-1000-gf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Marathon 1000 GF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Marathon 1000 GF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Marathon 1000 GF — common questions
What service environment suits Marathon 1000 GF?
The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Marathon 1000 GF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Marathon 1000 GF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Marathon 1000 GF
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
- Jotaprime 500
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Marathon 1000 GF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net