Offshore steel structures and ship coating (heavy-duty)
Model

Jotaprime PP10 temporary protective material

Jotaprime PP10 is the temporary protective material rust prevention (temporary protection) in Jotun's protective coatings line, specified for atmospheric exposure service. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Jotaprime PP10.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaprime PP10 — product overview

one-component temporary protective material product for use as rust prevention (temporary protection); fast-drying; substrates steel; service environment atmospheric exposure.

Jotaprime PP10 — positioning

Jotaprime PP10 is a temporary protective material rust prevention (temporary protection) from the Jotun range, formulated for steel structures in atmospheric exposure.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where fast-drying are specified, it combines with other products of the same system into a complete scheme.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Jotaprime PP10 — key data

ModelJotaprime PP10
Manufacturer product name0R7
Resin systemtemporary protective material
Componentsone-component
Typical number of coatsrust prevention (temporary protection)
Service environmentatmospheric exposure
Key characteristicsfast-drying
Colour rangeTo the manufacturer colour card
Application methodspray or brush
Surface preparation gradesa 2½ / st 2
Volume solids56 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point26 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaprime-pp10.pdf)

Application and system notes

Application: spray or brush (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry30 min20 min15 min10 min
Dried/cured for service2.5 h2 h1.5 h1 h

Data taken from the manufacturer's TDS jotun-jotaprime-pp10.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Jotaprime PP10 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotaprime PP10 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotaprime PP10 and the intended use.

Jotaprime PP10 — common questions

What are the key characteristics of Jotaprime PP10?

This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jotaprime PP10 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jotaprime PP10 be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Jotaprime PP10

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaprime PP10

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat