Offshore steel structures and ship coating (heavy-duty)
Model

Jotaprime 505 temporary protective material

Jotaprime 505 (1BH) is the temporary protective material rust prevention (temporary protection) in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Jotaprime 505.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaprime 505 — product overview

A one-component temporary protective material coating, normally used as rust prevention (temporary protection): key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel / galvanised steel / stainless steel.

Jotaprime 505 — positioning

Jotaprime 505 is the temporary protective material rust prevention (temporary protection) in Jotun's protective coatings line, specified for atmospheric exposure service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Jotaprime 505 — key data

ModelJotaprime 505
Manufacturer product name1BH
Resin systemtemporary protective material
Componentsone-component
Typical number of coatsrust prevention (temporary protection)
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Colour rangeTo the manufacturer colour card
Application methodspray or brush
Surface preparation gradesa 2½
Volume solids41 % ± 2 %
Flash point21 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaprime-505.pdf)

Application and system notes

Application: spray or brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry1 h30 min15 min
Walk-on dry8 h4 h2 h
Recoat, minimum8 h4 h2 h
Dried/cured for service14 d7 d3 d

Data taken from the manufacturer's TDS jotun-jotaprime-505.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as rust prevention (temporary protection); the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotaprime 505 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Jotaprime 505, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotaprime 505 — common questions

Which coat does Jotaprime 505 take in the system?

This model is typically used as rust prevention (temporary protection). The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotaprime 505?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotaprime 505?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Jotaprime 505

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaprime 505

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat