Jotaprime 500 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotaprime 500 — product overview
Jotaprime 500 belongs to the epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.
Jotaprime 500 — positioning
Jotaprime 500 is a epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service.
Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
It suits projects where fast-drying / high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Jotaprime 500 — key data
| Model | Jotaprime 500 |
|---|---|
| Manufacturer product name | 0AZ |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel |
| Key characteristics | fast-drying / high-build / abrasion-resistant |
| Colour range | Aluminium red / Grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / st 2 |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotaprime-500.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Jotaprime 500 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotaprime 500 — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Jotaprime 500, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotaprime 500 — common questions
How is the recoat interval for Jotaprime 500 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotaprime 500 be used on?
The TDS lists the substrate as carbon steel / galvanised steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotaprime 500?
The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotaprime 500
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotaprime 500
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net