Offshore steel structures and ship coating (heavy-duty)
Model

Jotaguard 100 epoxy

Jotaguard 100 is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. This model offers surface-tolerant / abrasion-resistant / chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotaguard 100.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaguard 100 — product overview

This is a two-component epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by surface-tolerant / abrasion-resistant / chemical-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / stainless steel / coated surfaces.

Jotaguard 100 — positioning

A epoxy primer / intermediate coat / topcoat in the Jotun range, Jotaguard 100 () is selected for steel structures exposed to atmospheric exposure / immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for surface-tolerant / abrasion-resistant / chemical-resistant.

Typical service environment: atmospheric exposure / immersion service.

Jotaguard 100 — key data

ModelJotaguard 100
Manufacturer product name
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel / coated surfaces
Key characteristicssurface-tolerant / abrasion-resistant / chemical-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids98 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point76 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaguard-100.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel / coated surfaces and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Jotaguard 100 — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Jotaguard 100, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotaguard 100 — common questions

What service environment suits Jotaguard 100?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotaguard 100 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jotaguard 100?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Jotaguard 100

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaguard 100

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat