Jotacote Xtend GF epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotacote Xtend GF — product overview
two-component epoxy product for use as primer / intermediate coat / topcoat; abrasion-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.
Jotacote Xtend GF — positioning
Jotacote Xtend GF is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.
Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
The model is notable for abrasion-resistant.
Typical service environment: atmospheric exposure / immersion service.
Jotacote Xtend GF — key data
| Model | Jotacote Xtend GF |
|---|---|
| Manufacturer product name | 6TB |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 88 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 32 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotacote-xtend-gf.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotacote Xtend GF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotacote Xtend GF and the intended use.
Jotacote Xtend GF — common questions
What are the minimum order quantity and lead time for Jotacote Xtend GF?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Jotacote Xtend GF?
This model offers abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Jotacote Xtend GF controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Jotacote Xtend GF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotacote Xtend GF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net