Jotacote UHB epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotacote UHB — product overview
This is a two-component epoxy product, typically used as primer / topcoat. It is characterised by high-build / abrasion-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / concrete.
Jotacote UHB — positioning
Jotacote UHB is the epoxy primer / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.
Three things decide the system: the substrate (carbon steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
Where high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.
Jotacote UHB — key data
| Model | Jotacote UHB |
|---|---|
| Manufacturer product name | 1FU |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / concrete |
| Key characteristics | high-build / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 96 % ± 2 % |
| Flash point | 35 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotacote-uhb.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 6 h | 5 h | 2 h | 45 min |
| Walk-on dry | 24 h | 16 h | 8 h | 2 h |
| Recoat, minimum | 24 h | 16 h | 8 h | 2 h |
Data taken from the manufacturer's TDS jotun-jotacote-uhb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Jotacote UHB follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotacote UHB — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Jotacote UHB, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotacote UHB — common questions
How is the recoat interval for Jotacote UHB controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotacote UHB be used on?
The TDS lists the substrate as carbon steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotacote UHB?
The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotacote UHB
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
- Jotaguard 630
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotacote UHB
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net