Offshore steel structures and ship coating (heavy-duty)
Model

Jota ZEP zinc-containing epoxy

Jota ZEP is a zinc-containing epoxy primer from the Jotun range, formulated for steel structures in atmospheric exposure. For the complete technical data, request the manufacturer's TDS and SDS for Jota ZEP.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jota ZEP — product overview

A two-component zinc-containing epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.

Jota ZEP — positioning

Jota ZEP (6BT) is the zinc-containing epoxy primer in the Jotun range; this page sets out its system position, parameters and supply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: atmospheric exposure.

Jota ZEP — key data

ModelJota ZEP
Manufacturer product name6BT
Resin systemzinc-containing epoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Colour rangeGrey
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2
Volume solids55 % ± 2 %
Density (specific gravity)2.1 kg/l
Flash point26 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jota-zep.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Touch dry30 min20 min12 min8 min5 min
Walk-on dry16 h8 h4 h2 h1 h
Recoat, minimum16 h8 h4 h2 h1 h
Dried/cured for service15 d12 d10 d6 d2 d

Data taken from the manufacturer's TDS jotun-jota-zep.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jota ZEP — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jota ZEP and the intended use.

Jota ZEP — common questions

How many components does Jota ZEP have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jota ZEP?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jota ZEP take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Jota ZEP

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jota ZEP

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat