Hardtop XPF polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop XPF — product overview
Hardtop XPF belongs to the polyurethane system and is a two-component product used as topcoat; service environment atmospheric exposure / low-temperature application; application and system notes are set out below.
Hardtop XPF — positioning
Jotun's Hardtop XPF is a polyurethane topcoat for atmospheric exposure / low-temperature application conditions, supplied with its technical documentation.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where high solids matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / low-temperature application conditions.
Hardtop XPF — key data
| Model | Hardtop XPF |
|---|---|
| Manufacturer product name | 0MC |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure / low-temperature application |
| Key characteristics | high solids |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 63 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 30 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-xpf.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 5 °C | 10 °C | 23 °C |
|---|---|---|---|---|---|
| Touch dry | 48 h | 10 h | 6 h | 4 h | 1.5 h |
| Walk-on dry | 60 h | 24 h | 16 h | 10 h | 5 h |
| Recoat, minimum | 72 h | 24 h | 16 h | 10 h | 5 h |
| Dried/cured for service | 60 d | 20 d | 15 d | 10 d | 5 d |
Data taken from the manufacturer's TDS jotun-hardtop-xpf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop XPF — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Hardtop XPF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Hardtop XPF — common questions
Which substrates can Hardtop XPF be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Hardtop XPF?
The service environment for this model is atmospheric exposure / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Hardtop XPF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Hardtop XPF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop XPF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net