Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop WT8 polyurethane

Hardtop WT8 is the polyurethane topcoat in Jotun's protective coatings line, specified for atmospheric exposure service. This model offers high solids / chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop WT8.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop WT8 — product overview

A two-component polyurethane coating, normally used as topcoat: key features high solids / chemical-resistant; used in atmospheric exposure; suitable on steel.

Hardtop WT8 — positioning

Hardtop WT8 is a polyurethane topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where high solids / chemical-resistant matters — tight application windows or demanding maintenance regimes.

Typical service environment: atmospheric exposure.

Hardtop WT8 — key data

ModelHardtop WT8
Manufacturer product name6FN
Resin systempolyurethane
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicshigh solids / chemical-resistant
Colour rangeLight grey
Application methodairless spray / brush / roller
Volume solids62 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point28 °C
GlossSemi-gloss
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-wt8.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Walk-on dry40 h24 h16 h8 h4 h
Recoat, minimum24 h18 h10 h5 h3 h
Dried/cured for service20 d14 d10 d5 d3 d

Data taken from the manufacturer's TDS jotun-hardtop-wt8.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Hardtop WT8 — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Hardtop WT8, send a request at the foot of this page, or contact us on WhatsApp or by email.

Hardtop WT8 — common questions

How is the recoat interval for Hardtop WT8 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Hardtop WT8 be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Hardtop WT8?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Hardtop WT8

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop WT8

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat