Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop Flexi Alu polyurethane

Hardtop Flexi Alu is the polyurethane topcoat in Jotun's protective coatings line, specified for atmospheric exposure service. This model offers high-build. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop Flexi Alu.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop Flexi Alu — product overview

two-component polyurethane product for use as topcoat; high-build; substrates steel; service environment atmospheric exposure.

Hardtop Flexi Alu — positioning

Hardtop Flexi Alu (0SN) — in the Jotun range — is a polyurethane product normally used as topcoat where atmospheric exposure conditions apply.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

It suits projects where high-build matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Hardtop Flexi Alu — key data

ModelHardtop Flexi Alu
Manufacturer product name0SN
Resin systempolyurethane
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicshigh-build
Colour rangeRAL 9006
Application methodairless spray / brush
Surface preparation gradesa 2½ / st 2
Volume solids54 % ± 2 %
Density (specific gravity)1.1 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-flexi-alu.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry6 h3 h1.5 h1 h
Walk-on dry16 h8 h4 h2 h
Recoat, minimum22 h17 h6 h2 h
Dried/cured for service15 d10 d7 d4 d

Data taken from the manufacturer's TDS jotun-hardtop-flexi-alu.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Hardtop Flexi Alu — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Hardtop Flexi Alu, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Hardtop Flexi Alu — common questions

What are the key characteristics of Hardtop Flexi Alu?

This model offers high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Hardtop Flexi Alu controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Hardtop Flexi Alu be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Hardtop Flexi Alu

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop Flexi Alu

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat