Hardtop F15 HS fluoropolymer
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop F15 HS — product overview
Hardtop F15 HS belongs to the fluoropolymer system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.
Hardtop F15 HS — positioning
Hardtop F15 HS belongs to the fluoropolymer family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Hardtop F15 HS — key data
| Model | Hardtop F15 HS |
|---|---|
| Manufacturer product name | 6DM |
| Resin system | fluoropolymer |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Volume solids | 66 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 34 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-f15-hs.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 2 h | 1 h | 30 min | 20 min |
| Walk-on dry | 32 h | 16 h | 8 h | 4 h |
| Recoat, minimum | 32 h | 16 h | 8 h | 4 h |
| Dried/cured for service | 15 d | 10 d | 5 d | 2 d |
Data taken from the manufacturer's TDS jotun-hardtop-f15-hs.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop F15 HS — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Hardtop F15 HS, send a request at the foot of this page, or contact us on WhatsApp or by email.
Hardtop F15 HS — common questions
What are the minimum order quantity and lead time for Hardtop F15 HS?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Hardtop F15 HS?
This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Hardtop F15 HS controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Hardtop F15 HS
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop F15 HS
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net