Hardtop Alfa polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop Alfa — product overview
two-component polyurethane product for use as topcoat; high solids; substrates steel; service environment atmospheric exposure.
Hardtop Alfa — positioning
Jotun's Hardtop Alfa is a polyurethane topcoat for atmospheric exposure conditions, supplied with its technical documentation.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where high solids matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure.
Hardtop Alfa — key data
| Model | Hardtop Alfa |
|---|---|
| Manufacturer product name | 6CV |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids |
| Colour range | Limited colour range |
| Application method | airless spray / brush / roller |
| Volume solids | 64 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 30 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-alfa.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 16 h | 6 h | 3.5 h | 2 h |
| Walk-on dry | 24 h | 14 h | 7 h | 4 h |
| Recoat, minimum | 24 h | 14 h | 7 h | 4 h |
| Dried/cured for service | 21 d | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-alfa.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ASTM D5590
- GB 30981-2020
- GB 38508-2020
- ISO 11890-1
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop Alfa — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Hardtop Alfa, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop Alfa — common questions
What are the key characteristics of Hardtop Alfa?
This model offers high solids. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Hardtop Alfa controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Hardtop Alfa be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Hardtop Alfa
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop Alfa
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net