Futura AS polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Futura AS — product overview
A two-component polyurethane coating, normally used as topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on steel.
Futura AS — positioning
Futura AS belongs to the polyurethane family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Futura AS — key data
| Model | Futura AS |
|---|---|
| Manufacturer product name | 0DB |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Volume solids | 47 % ± 2 % |
| Density (specific gravity) | 1,2 kg/l |
| Flash point | 25 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-futura-as.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 4 h | 2 h | 1 h | 30 min | 30 min |
| Walk-on dry | 20 h | 10 h | 6 h | 3 h | 1.5 h |
| Recoat, minimum | 12 h | 10 h | 6 h | 3 h | 1.5 h |
| Dried/cured for service | 20 d | 15 d | 10 d | 5 d | 2 d |
Data taken from the manufacturer's TDS jotun-futura-as.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Futura AS — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Futura AS, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Futura AS — common questions
How many components does Futura AS have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Futura AS?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Futura AS take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Futura AS
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Futura AS
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net