Barrier 75 CN zinc-containing epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Barrier 75 CN — product overview
Barrier 75 CN belongs to the zinc-containing epoxy system and is a two-component product used as primer; service environment atmospheric exposure; application and system notes are set out below.
Barrier 75 CN — positioning
A zinc-containing epoxy primer in the Jotun range, Barrier 75 CN (0X6) is selected for steel structures exposed to atmospheric exposure.
Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
It suits projects where fast-drying matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure.
Barrier 75 CN — key data
| Model | Barrier 75 CN |
|---|---|
| Manufacturer product name | 0X6 |
| Resin system | zinc-containing epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel |
| Key characteristics | fast-drying |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 66 % ± 2 % |
| Density (specific gravity) | 2 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-barrier-75-cn.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 2 h | 1 h | 40 min | 20 min | 6 min | 3 min |
| Walk-on dry | 24 h | 10 h | 5 h | 2 h | 1 h | 30 min |
| Recoat, minimum | 24 h | 10 h | 5 h | 2 h | 1 h | 30 min |
| Dried/cured for service | 20 d | 14 d | 10 d | 7 d | 5 d | 2 d |
Data taken from the manufacturer's TDS jotun-barrier-75-cn.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ASTM D520
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-2
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Barrier 75 CN — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Barrier 75 CN, send a request at the foot of this page, or contact us on WhatsApp or by email.
Barrier 75 CN — common questions
Where can I find the technical data for Barrier 75 CN?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Barrier 75 CN take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Barrier 75 CN?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Barrier 75 CN
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Barrier 75 CN
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net